Ask The Glue Doctor host Lance Braun chats with Lord Corporation Senior Technical Representative Michael Verdi, about structural adhesive applications and Lord Corporation’s new Maxlok line of structural adhesives in this video podcast (vodcast).

by Oriolus

Article by Viv Hinks

All types of building and DIY jobs these days depend upon the use of various adhesives, fillers and sealants. Once where screws, nails or more sophisticated jointing was the order of the day, now all manner of substances can be used to great effect, helping to save time and simplify many tasks.

Adhesives are now regularly used for bonding materials such as UPVC, glass as well as the more the obvious areas involving wood and metal. Glue types like PVA are in regular use not only for bonding materials together but also for priming surfaces (in diluted form). Waterproof variants are also often specified. Contact adhesives are regularly specified for large sections of metal, plastics, or decorative features such as coving for instance. Often available in tube type cartridges (requiring a dispensing gun), grab adhesives are used again for large sections or areas where nails or screws are to be avoided or are less desirable. If used properly according to the manufacturers instructions, grab adhesives can create very strong bonds. Resin style adhesives are made up of two elements, which are mixed at the point of use. Possibly somewhat superseded by the availability of ready to use cartridge glues, resin does still find a place especially where strong bonds are required such as anchor points for shelving – when used in conjunction with screws or expanding bolts etc.

Take a glance in any large DIY store and the choice of sealants can be bewildering. Many sealants have some kind of waterproofing (or resistance at least) and are often formed from a silicone mixture. Generally available on cartridge form not only are there sealants for differing jobs but there are often colour choices as well. It’s well worth reading exactly what a sealant is best used for before you end up with the wrong substance for the job. Bathroom type sealants are often very resistant to water and often mould. They’re obviously great for sealing around sinks, showers, baths and so forth, but are not next to resistant when it comes to accepting a painted finish. Often referred to as ‘high modulus’, bathroom sealants offer less flexibility as opposed to ‘low modulus’ sealants, which are often recommended for glazing work. A great universal option is decorators caulk which can be used in a massive array of jobs. Caulk can be a bit of a lifesaver for filling in around window frames, skirting boards, doors, as well as general cracks in walls and ceilings etc. It’s possibly best to avoid overuse though; although it’ll help you patch in a few errors here and there it should be thought of as remedy for poor work. Overuse can be a bit glaring obvious especially if time hasn’t been taken to clean, smooth and perhaps paint.

One final, but nevertheless, invaluable filler material is expanding foam. Used in areas where gaps are so large regular fillers can’t be used, expanding foam offers a quick and effective solution. Being polyurethane-based, it’s worth checking heat tolerance if filling in around heating flues and the like.

Find More Metal Glue Articles

by Lee Kottner

Article by Art Penz

Crafting is a hobby that many people are taking up today, and most are just starting out with out much of an idea of how to do things. I am here to try and save you some grief and help you decide what types of adhesives are for you. The types of available adhesives are either both or a combination of both of both Tape, and Glue. I’m going to tell you the pros and cons of many different types and give you an image of how many types there are, and what may be the best for your project. There are many different types of adhesives that anyone can use.Liquid GluesLiquid glues are good for many reasons. They are available in both permanent and re-positionable types. The best things for liquids and cements are for projects involving collage work, decoupage, adhering glitter, and cardboard-to-cardboard applications. Drying time varies by type and application and where you are letting it dry. The drying time can be anytime from instant bond to 24 hours or in some cases, more. When working with liquid glue, you want to be careful not to put too much on there, because you can either get it places you don’t want to, or make weak paper and such warp or buckle. I would not recommend using these types of glues on either scrap booking or any archival-type projects.Pastes and Solid SticksPastes and Solid Sticks are inexpensive, non-toxic, fast-drying and easy to use, glue sticks and pastes are ideal for children’s projects. They’re easy to use for both handling and application. Cards, and scrap booking projects that are not meant to last an extended period of time. These adhesives tend lose their tackiness over time which will cause them to discolor and curl papers and photos. I would not recommend using these types on anything that you want to for a long time; but the upsides of these still stand.Spray AdhesivesSpray adhesives are simply glue in aerosol cans. Available in either permanent or re-positionable bonds, these are very nice all-around adhesives for most flat paper projects such as scrap booking, card making, and attaching vellum. They provide a strong, dependable bond, do not buckle or bubble paper, and are quick and easy to apply. The downside is that they are usually not acid-free, so they need to be applied in a well-ventilated area. They can also be quite messy, if you don’t have a steady hand. Try not to get it on your hands, and make sure to wash your hands thoroughly after use.Tape RunnersTape runners are extremely good scrap booking adhesives, they’re both dependable and refillable. Runners are cartridges that you can refill with a nice double sided tape that rolls onto paper in seconds. It is one of the most efficient ways to scrap book and it saves time and a whole lot of hassle. I have found that tape runners are really good for many practical applications, but you always run the risk of messing up and maybe ruining your paper when working with tape. Just remember to be careful and make sure everything is set before laying the lines.Glue dots, lines, etcGlue dots are little double sided sticky dots, available in all sorts of shapes and sizes. They can be dots, lines, anything you think of pretty much. They also come in many different colors. They are good for embellishments and outlining. These are usually good for projects involving metal. Glue dots are very nice when you’re trying to highlighting specific things on your project.As you can very well see, there are several different types of adhesives. These are just main categories and there are a lot more than is just said here. Different companies do different things to there products, and they all have variations that require experience with them to manage very effectively. I hope that this general overview of the different categories of adhesives helps you out in your crafting. Good luck, and happy crafting!

2011/ 05/ 06(Fri.) @Earthdom, Tokyo HEAVY METAL GLUE are: NEGISHI（Vo.) from Church Of Misery, GATES KEN(Gt.) from Marble Sheep RIE(Ba.) from 不思議なバレッツ-ex.Marble Sheep KEN ISHIHARA(Dr.) from.kajuzz（三上寛）-ex White Heaven (Filmed by Fujiemon-san from Austin Records.)

Related Metal Glue Articles

Research and Markets: Global Industry Analysts – Adhesives and Sealants …
This report analyzes the worldwide markets for Adhesives and Sealants in Millions of Pounds, and US$ Million by the following Chemical Types: Adhesives (Styrene Butadiene Rubber, Phenolic, Polyolefin, Epoxy, Starch & Dextrin, Acrylic (includes …
Read more on Bradenton Herald

Some cool adhesives images:

Scrap Time – Ep. 9 – Adhesives


Image by Shopping Diva
In episode 9 I talk about adhesives and their purposes.

www.scraptime.ca

Jan 25th, 2011 %22make the opaque line work for me 2%22 design by Dawn Arsenaux – hand cut & pasted with scissors & adhesive


Image by ms. neaux neaux
collage
hand cut with scissors, pasted with adhesive

Research and Markets: Global Industry Analysts – Adhesives and Sealants …
This report analyzes the worldwide markets for Adhesives and Sealants in Millions of Pounds, and US$ Million by the following Chemical Types: Adhesives (Styrene Butadiene Rubber, Phenolic, Polyolefin, Epoxy, Starch & Dextrin, Acrylic (includes …
Read more on Business Wire (press release)

by b mcfee

Article by Charles Kassotis

An adhesive is something that helps you stick objects onto something else. This can be gluing googly eyes on a walnut, gluing pictures into a scrapbook, or even gluing two pieces of wood together. Adhesives are very helpful in many ways and they can be used to do a great many things. Adhesives can even include tape, like duct tape, which are used to make repairs. There are many different ways to use adhesives, and different types of adhesives to fulfill a variety of uses.

Some adhesives, like most glues, take some time to dry. This can be quite useful if you are worried about making mistakes. That way, if you glue something down and realize that you need to move it, you can take it off without worrying about tearing something. Other adhesives bond almost instantly. This can be convenient if you are in a situation that requires that you have the bond immediate so that whatever it is you are gluing does not slide down. However, if you make a mistake with something, you may have to start all over again. You should choose your adhesive carefully, taking special steps to make sure that you have the kind of drying speed that you need to get the job done most effectively.

Additionally, some adhesives are stronger than others. Super glue and gorilla glue are two examples of strong adhesives that are difficult to remove once they are used. You can use a solvent to disolve the glue, but it is difficult to clean off, and sometimes can stain clothing and other fabrics. Weak adhesives are easy to remove, even after they dry. Glue sticks are notorious for being weak. Even after the glue from a glue stick dries, it is possible to pull whatever you glued right off, without tearing or ruining anything.

Some adhesives are especially suited to specific tasks. Interestingly enough, most of these types of adhesives are easy to identify, as they explain themselves in the kind of adhesive they are. Wood glue, as one might expect, is used for gluing wood. It is helpful when one is setting up a project. It holds the pieces in place, and lets you see how something works before you begin nailing it together and setting it more permanently. Craft glue is ideal for crafts. It is especially suited for making things like wreaths and homemade jewelry. An adhesive like rubber cement may not provide very good clues, but it is good for scrapbooking. It won’t seep through and ruin pictures when you put it on the back, and it works well with the acid free paper used in scrapbooking projects.

Adhesives are of great use. They can be used for a variety of things, and they help us hold things together. They are great for repairs, craft projects, and even for building projects. A special kind of adhesive is even used to hold dentures in many people’s mouths. Without adhesives, the world would certainly not hold together as well as it does.

Related Gorilla Glue Articles

Bethlehem, PA (PRWEB) January 20, 2012

Tapeworks, a national supplier of engineered tape solutions, recently announced it has become an authorized distributor and approved tape converter of 3M industrial adhesives and tapes. As a pressure-sensitive tape converter, Tapeworks is able to match and adapt 3M technologies to the individual requirements of each customer.

As an authorized 3M tape converter, Tapeworks can now leverage 3Ms extensive line of adhesives for the following applications: identifying, bonding, protecting, electrical shielding and conducting. Tapeworks adds value to 3M technologies by providing expert engineering services that convert stock adhesives, liners, paper face stocks, film face stocks, and tape backings to meet custom manufacturing requirements. To leverage 3Ms adhesives and technologies, Tapeworks provides a range of engineering services that might include part design, rapid prototyping, lamination and die-cutting.

When a company approaches Tapeworks, its trying to solve a construction, manufacturing, design or fabrication problem, says Randall Emmons, Tapeworks president. Becoming an approved 3M converter expands our list of available adhesive products and reinforces our commitment to engineering the best possible solution for each scenario.

For more than 25 years, Tapeworks has engineered custom tape products that solve construction, manufacturing, design or fabrication problems. This experience in the industrial pressure-sensitive adhesives market has enabled Tapeworks to respond to customers’ needs with creative, engineered tape solutions. Visit http://www.tape-works.com for more information.

# # #

by shershe

Article by Geoff Lilienfeld

When it comes to choosing the right types of adhesives, there is no one-type-fits-all solution. Different types of glues and adhesives work through different levels of adhesion or strength, so using one for a specific application may not work well with another. Here is a short list of some of the most common glues and adhesives in the market and which applications they are best for. White glueWhite glue is great for bonding paper products, such as cardboard, craft paper, art paper, handmade paper, and many others. Due to their ease of use and economical price, white glue is used for many paper-based projects, especially for children at school. One of the draw backs in using white glue is water solubility, which is not recommended for materials immersed in water. For water proof projects, you will need epoxy or a stronger type of adhesive. Hot melt glue from glue gunOne of the most favorite types of glue by crafters is the hot melt glue. Often dispensed through a gun and used for a wider range of materials such as paper, fabric, and wood, hot melt glue provides better adhesion than common white glue. Unlike epoxy it doesn’t have a long curing time. However hot melt glue is not ideal for outdoor applications or for projects that require water proofing. CyanoacrylateCyanoacrylate is also known as super glue. Stronger than regular glue, this type of adhesive is usually dispensed through a tube. Its waterproof and instant bonding capabilities make it a good choice for gluing non-porous materials such as plastic and metal. These types of adhesives are also great for ceramics and tiles. Construction adhesiveConstruction adhesive is a type of adhesive made specifically for construction materials such as wood, slate, marble, stone or for outdoor and indoor projects like flooring and paneling. Most types of construction adhesives have waterproof features, making them brilliant for outdoor installations. Epoxy glueEpoxy adhesive is another kind of waterproof adhesive that can bond porous materials. While epoxy glue takes some minutes to set and several hours to cure completely, it offers a stronger bond than white glue, super glue, and hot melt glue. Choosing the right kind of glue, such as the Loctite Super Glue Ultra Gel, depends on several factors; such as the materials you are using and the kind of adhesion strength you require. A good adhesive can help you get your projects done on time, so take time to shop for the right glue or adhesive, according to the application you will be using them for. The Hardware City, an Online hardware store features a vast inventory of over 45,000 products at unbeatable prices. Check out their deal on the Super Glue Ultra Gel today!

Adhesives May Predict Structural Failures in Planes
A research team in the Mechanics and Aerospace Design Lab at the University of Toronto, is working on the development of these self-monitoring adhesives that will join structural elements. The materials may be one part of the solution for coping with …
Read more on Design News

Hybrid Exercises Option for Safe Sealants and Adhesives
For more information please see the 8K filed on October 18, 2011 at www.sec.gov "The addition of sealants and adhesives to our pipeline of products significantly increases our potential offering to clients and allows us to access another significant …
Read more on MarketWatch (press release)

UPM Raflatac Releases New RH09 Hotmelt Adhesive For Food Package
UPM Raflatac announces the release of its new and improved RH09 hotmelt adhesive for the Americas market, which is designed to meet the rigors of food package labeling. Labelstock converters and end-users leverage RH09 products for industry …
Read more on Adhesives and Sealants (press release)

Techsil launch New Self-Adhesive Tapes Range From Specialist
Techsil is pleased to announce an agreement with ITW Stokvis Tapes the leading independent adhesive tapes specialist. Techsil can now offer Stokvis' range of structural bond tapes, double-coated foam tapes and die-cut self-adhesive tapes. …
Read more on Adhesives and Sealants (press release)